Drifter Drill Rod R32-T38
Lenghth:3400mm
Weight:21.7kg
Material:23CrNi3Mo
Key words：
Thread Drill Rod
Product Details
Desciption
Drifter drill rods are a kind of threaded drill rod used in conjunction with a hydraulic trolley, and is widely used in face drilling and bolting in underground mining and tunnel excavation operations. The main thread types of drifter rods are R25, R28, R32,which can be divided into extension rods and speed rods,Drifter drill rod Commonly used hexagonal tubes
Performance
These rods are produced with round or hexagonal sections in all common thread designs, and in Male (M/M) or Female (M/F) connections. M/F rods provides tighter connections and is easier for handling and quicker for uncoupling than M/M rods, and are potential to drill straighter holes.
Application
Drifter drill rod is mainly used on the full hydraulic drifting jumbo. This drifting drill rod can be used for roadway excavation blasting and anchor hole drilling in underground mine, as well as used for the excavation of traffic tunnels, hydropower engineering diversion tunnels,underground engineering, etc.
Details Form
| Drill rod | Length | Outer diameter | Weight （kg） | HENGLONG P/N | |||||
| mm | foot | mm | inch | ||||||
|
Drifter rod, R32-Hex25-R25 Flushing hole 8.6mm
|
2100 | 7' | 25 | 1" | 8.6 | 22H25-R25/R32-2100-23 | |||
| 2400 | 8' | 25 | 1" | 9.6 | 22H25-R25/R32-2400-23 | ||||
| 2600 | 8'8" | 25 | 1" | 10.4 | 22H25-R25/R32-2600-23 | ||||
| 2800 | 9' | 25 | 1" | 11.1 | 22H25-R25/R32-2800-23 | ||||
| 3090 | 10' | 25 | 1" | 12.2 | 22H25-R25/R32-3090-23 | ||||
| 3700 | 12' | 25 | 1" | 14.6 | 22H25-R25/R32-3700-23 | ||||
|
Extension rod , R25-Hex25-R25 Flushing hole 8.6mm
|
915 | 3' | 25 | 1" | 3.4 | 23H25-R25-0915-23 | |||
| 1000 | 3'33/8" | 25 | 1" | 4.0 | 23H25-R25-1000-23 | ||||
| 1220 | 4' | 25 | 1" | 4.6 | 23H25-R25-1220-23 | ||||
| 1525 | 5' | 25 | 1" | 5.8 | 23H25-R25-1525-23 | ||||
| 1830 | 6' | 25 | 1" | 7.0 | 23H25-R25-1830-23 | ||||
| 2435 | 8' | 25 | 1" | 9.3 | 23H25-R25-2435-23 | ||||
| 3050 | 10' | 25 | 1" | 12.0 | 23H25-R25-3050-23 | ||||
|
Speedrod, R25-Hex25-R25 Flushing hole 8.6mm
|
610 | 2' | 25 | 1" | 2.7 | 24H25-R25/35-0610-23 | |||
| 1220 | 4' | 25 | 1" | 5.1 | 24H25-R25/35-1220-23 | ||||
|
Drifter rod,R32-Hex28-R28 Flushing hole 8.8mm
|
2400 | 7'10" | 28 | 1 1/8 | 12.2 | 22H28-R28/R32-2400-23 | |||
| 2750 | 9' | 28 | 1 1/8 | 14.4 | 22H28-R28/R32-2750-23 | ||||
| 3700 | 12'11/2" | 28 | 1 1/8 | 18.9 | 22H28-R28/R32-3700-23 | ||||
| 4000 | 13'13/8" | 28 | 1 1/8 | 20.4 | 22H28-R28/R32-4000-23 | ||||
| 4310 | 14'11/2" | 28 | 1 1/8 | 22.0 | 22H28-R28/R32-4310-23 | ||||
| 4920 | 16'11/2" | 28 | 1 1/8 | 25.3 | 22H28-R28/R32-4920-23 | ||||
|
Drifter rod, R38-Hex32-R28 Flushing hole 9.6mm
|
2900 | 9'61/8" | 32 | 1 1/4 | 18.8 | 22H32-R28/R38-2900-23 | |||
| 3090 | 10'11/2" | 32 | 1 1/4 | 20.0 | 22H32-R28/R38-3090-23 | ||||
| 3700 | 12'11/2" | 32 | 1 1/4 | 24.0 | 22H32-R28/R38-3700-23 | ||||
| 4310 | 14'11/2" | 32 | 1 1/4 | 27.9 | 22H32-R28/R38-4310-23 | ||||
|
Drifter rod, R32-Hex32-R28 Flushing hole 9.6mm
|
3090 | 10'11/2" | 32 | 1 1/4 | 20.0 | 22H32-R28/R32-3090-23 | |||
| 3700 | 12'11/2" | 32 | 1 1/4 | 23.5 | 22H32-R28/R32-3700-23 | ||||
|
Drifter rod, R28-Hex28-R28 Flushing hole 8.8mm
|
3050 | 10' | 28 | 1 1/8 | 15.0 | 23H28-R28-3050-23 | |||
|
Drifter rod, R28-Hex28-R28 Flushing hole 8.8mm
|
3050 | 10' | 28 | 1 1/8 | 15.0 | 24H28-R28/39-3050-23 | |||
|
Drifter rod,R/T38-Hex32-R32 Flushing hole 9.6mm
|
2400 | 7'10" | 32 | 1 1/4 | 15.3 | 22H32-R32/T38-2400-23 | |||
| 3090 | 10'11/2" | 32 | 1 1/4 | 19.8 | 22H32-R32/T38-3090-23 | ||||
| 3400 | 11'13/4" | 32 | 1 1/4 | 21.7 | 22H32-R32/T38-3400-23 | ||||
| 4000 | 13'13/8" | 32 | 1 1/4 | 25.5 | 22H32-R32/T38-4000-23 | ||||
| 4310 | 14'11/2" | 32 | 1 1/4 | 27.5 | 22H32-R32/T38-4310-23 | ||||
| 4920 | 16'11/2" | 32 | 1 1/4 | 31.3 | 22H32-R32/T38-4920-23 | ||||
| 5530 | 18'11/2" | 32 | 1 1/4 | 35.2 | 22H32-R32/T38-5530-23 | ||||
|
Drifter rod,R/T38-Hex35-R32 Flushing hole 9.5mm
|
3090 | 10'11/2" | 35 | 1 3/8 | 24.0 | 22H35-R32/T38-3090-23 | |||
| 3700 | 12'11/2" | 35 | 1 3/8 | 28.7 | 22H35-R32/T38-3700-23 | ||||
| 4000 | 13'13/8" | 35 | 1 3/8 | 31.1 | 22H35-R32/T38-4000-23 | ||||
| 4310 | 14'11/2" | 35 | 1 3/8 | 33.4 | 22H35-R32/T38-4310-23 | ||||
| 4920 | 16'11/2" | 35 | 1 3/8 | 37.8 | 22H35-R32/T38-4920-23 | ||||
| 5530 | 18'11/2" | 35 | 1 3/8 | 42.9 | 22H35-R32/T38-5530-23 | ||||
| 6100 | 20' | 35 | 1 3/8 | 47.3 | 22H35-R32/T38-6100-23 | ||||
|
Speedrod, T38-Hex35-R32 Flushing hole 9.5mm
|
3700 | 12'11/2" | 35 | 1 3/8 | 29.0 | 24H35-R32/T38-3700-23 | |||
| 4310 | 14'11/2" | 35 | 1 3/8 | 34.1 | 24H35-R32/T38-4310-23 | ||||
| 4920 | 16'11/2" | 35 | 1 3/8 | 38.8 | 24H35-R32/T38-4920-23 | ||||
| 5530 | 18'11/2" | 35 | 1 3/8 | 43.6 | 24H35-R32/T38-5530-23 | ||||
| 6400 | 21' | 35 | 1 3/8 | 50.3 | 24H35-R32/T38-6400-23 | ||||
HENGLONG workshop and Process of manufacturing
Packing and shipping
Factory
Customer visit
Production
QUALITY INSPECTION PROCESS
Product quality is one of the core links in the development and growth of Yanggu Henglong Engineering Co., Ltd. Our company has strict internal and external inspection processes to ensure the quality of our products. Our inspection process for our products is as follows.
Related Products
MESSAGE
Contact
China office:
WhatsApp:+8613863587857
Tel:+86-635-8278268
Fax:+86-635-6858268
Email:info@hlrocktools.com
Add:Sipeng Street,Shouzhang Town,
Yanggu County,Shandong Province,China
www.hlrocktools.com
Pakistan Office:
CONTACT:Muhammad Haider
WhatsApp:+923246464600
Email:info@hlrocktools.com
Add:PopCorn Studio Gulberg,Block K Gulberg 2,
Lahore,Pakistan
www.hlrocktools.com
©2023 Yanggu Henglong Construction Machinery Co., Ltd .SEO
