PRODUCTS CENTER
Germany Low air pressure DTH hammer
Product name:CIR90 Low air pressure DTH hammer
Hammer Length without bit:855mm
Top sub thread:F48x10PIN
Outside diameter:80(mm)
Weight:：22kg
Bit diameter:90-120(mm)
Working Pressure:5-10(Bar)
Air consumption:7-12(M³/min)
Hammer Length without bit:855mm
Top sub thread:F48x10PIN
Outside diameter:80(mm)
Weight:：22kg
Bit diameter:90-120(mm)
Working Pressure:5-10(Bar)
Air consumption:7-12(M³/min)
Category:
GermanyDTH hammer tools
Product Description
Description
Low air pressure DTH hammer is a kind of impactor with plate valve, single piston and central exhaust structure, which is driven by compressed air. Little amount of high pressure water can be added to the compressed air to prevent dust pollution for getting a better performance .
Performance
The performance of low air pressure DTH hammer
1.Large single impact energy, low energy consumption for rock drilling.
2.Approximate weight ratio of piston and drill bit and long efficient acting time are benefit to increase rock drilling efficiency and prolong the drilling tool service life.
3.Good effect of central exhaust and slag discharge, reducing the repeated crushing of rock.
4.Equip with check-valve assembly, making drilling in water possible.
Applications
Low air pressure DTH hammers are used toUnderground Mining, Water well, Mining, Quarry etc.
Specification
| LOW AIR PRESSURE HAMMERS | |||||
| CIR-50 | Product data: | ||||
 |
Hammer Length without bit: | 628(mm) | |||
| Top sub thread: | F32x8PIN | ||||
| Outside diameter: | 44(mm) | ||||
| Weight: | 5(KG) | ||||
| Bit diameter: | 50(mm) | ||||
| Working Pressure: | 4-10(Bar) | ||||
| Air consumption: | 3-5(M³/min) | ||||
| Bit shank: | CIR50 | ||||
| item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | CIR50-01 | 8、Air Distributor | CIR50-08 | ||
| 2、Cap | CIR50-02 | 9、Inner Cylinder | CIR50-09 | ||
| 3、Check Valve | CIR50-03 | 10、Piston | CIR50-10 | ||
| 4、Spring | CIR50-04 | 11、Guide Sleeve | CIR50-11 | ||
| 5、Shim | CIR50-05 | 12、Driver Sub | CIR50-12 | ||
| 6、Valve cap | CIR50-06 | 13、Outer Sleeve | CIR50-13 | ||
| 7、Valve | CIR50-07 | ||||
| CIR-60 | Product data: | ||||
 |
Hammer Length without bit: | 777(mm) | |||
| Top sub thread: | F42x8PIN | ||||
| Outside diameter: | 53(mm) | ||||
| Weight: | 7.5(KG) | ||||
| Bit diameter: | 60(mm) | ||||
| Working Pressure: | 4-10(Bar) | ||||
| Air consumption: | 3-7(M³/min) | ||||
| Bit shank: | CIR60 | ||||
| Item Description | Part Number | ltem Description | Part Number | ||
| 1、Top Sub | CIR60-01 | 8、Valve | CIR60-08 | ||
| 2、Cap | CIR60-02 | 9、Air Distributor | CIR60-09 | ||
| 3、Check Valve | CIR60-03 | 10、Inner Cylinder | CIR60-10 | ||
| 4、Spring | CIR60-04 | 11、Piston | CIR60-11 | ||
| 5、Shim | CIR60-05 | 12、Guide Sleeve | CIR60-12 | ||
| 6、Rubber ring | CIR60-06 | 13、Driver Sub | CIR60-13 | ||
| 7、Valve cap | CIR60-07 | 14、Outer Sleeve | CIR60-14 | ||
| CIR-65 | Product data: | ||||
 |
Hammer Length without bit: | 745(mm) | |||
| Top sub thread: | F42x10PIN | ||||
| Outside diameter: | 61(mm) | ||||
| Weight: | 13(KG) | ||||
| Bit diameter: | 65(mm) | ||||
| Working Pressure: | 4-10(Bar) | ||||
| Air consumption: | 6-12(M³/min) | ||||
| Bit shank: | CIR65 | ||||
| Item Description | |||||
| Item Description | Part Number | ltem Description | Part Number | ||
| 1、Top Sub | CIR65-01 | 8、Valve | CIR65-08 | ||
| 2、Cap | CIR65-02 | 9、Air Distributor | CIR65-09 | ||
| 3、Check Valve | CIR65-03 | 10、Inner Cylinder | CIR65-10 | ||
| 4、Spring | CIR65-04 | 11、Piston | CIR65-11 | ||
| 5、Shim | CIR65-05 | 12、Guide Sleeve | CIR65-12 | ||
| 6、Rubber ring | CIR65-06 | 13、Driver Sub | CIR65-13 | ||
| 7、Valve cap | CIR65-07 | 14、Outer Sleeve | CIR65-14 | ||
| CIR-76A | Product data: | ||||
 |
Hammer Length without bit: | 811(mm) | |||
| Top sub thread: | F48x10PIN | ||||
| Outside diameter: | 66(mm) | ||||
| Weight: | 13.5(KG) | ||||
| Bit diameter: | 76(mm) | ||||
| Working Pressure: | 4-10(Bar) | ||||
| Air consumption: | 6-10(M³/min) | ||||
| Bit shank: | CIR70 | ||||
Item Description |
Part Number |
ltem Description |
Part Number |
||
| 1、Top Sub | CIR76A-01 | 8、Valve | CIR76A-08 | ||
| 2、Cap | CIR76A-02 | 9、Air Distributor | CIR76A-0g | ||
| 3、Check Valve | CIR76A-03 | 10、Inner Cylinder | CIR76A-10 | ||
| 4、Spring | CIR76A-04 | 11、Piston | CIR76A-11 | ||
| 5、Shim | CIR76A-05 | 12、Guide Sleeve | CIR76A-12 | ||
| 6、Rubber ring | CIR76A-06 | 13、Driver Sub | CIR76A-13 | ||
| 7.Valve cap | CIR76A-07 | 14、Outer Sleeve | CIR76A-14 | ||
| CIR-90A | Product data: | ||||
 |
Hammer Length without bit: | 855(mm) | |||
| Top sub thread: | F48x10PIN | ||||
| Outside diameter: | 80(mm) | ||||
| Weight: | 22(KG) | ||||
| Bit diameter: | 90-120(mm) | ||||
| Working Pressure: | 5-10(Bar) | ||||
| Air consumption: | 7-12(M³/min) | ||||
| Bit shank: | CIR90 | ||||
Item Description |
Part Number |
ltem Description |
Part Number |
||
| 1、Top Sub | CIR90A-01 | 8、Valve | CIR90A-08 | ||
| 2、Cap | CIR90A-02 | 9、Air Distributor | CIR90A-09 | ||
| 3、Check Valve | CIR90A-03 | 10、Inner Cylinder | CIR90A-10 | ||
| 4、Spring | CIR90A-04 | 11、Piston | CIR90A-11 | ||
| 5、Shim | CIR90A-05 | 12、Guide Sleeve | CIR90A-12 | ||
| 6、Rubber ring | CIR90A-06 | 13、Driver Sub | CIR90A-13 | ||
| 7、Valve cap | CIR90A-07 | 14、Outer Sleeve | CIR90A-14 | ||
| CIR-90B | Product data: | ||||
 |
Hammer Length without bit: | 840(mm) | |||
| Top sub thread: | F48x10PIN | ||||
| Outside diameter: | 80(mm) | ||||
| Weight: | 22(KG) | ||||
| Bit diameter: | 90-120(mm) | ||||
| Working Pressure: | 5-10(Bar) | ||||
| Air consumption: | 7-12(M³/min) | ||||
| Bit shank: | CIR90 | ||||
Item Description |
Part Number |
ltem Description |
Part Number |
||
| 1、Top Sub | CIR90B-01 | 8、Valve | CIR90B-08 | ||
| 2、Cap | CIR90B-02 | 9、Air Distributor | CIR90B-09 | ||
| 3、Check Valve | CIR90B-03 | 10、Inner Cylinder | CIR90B-10 | ||
| 4、Spring | CIR90B-04 | 11、Piston | CIR90B-11 | ||
| 5、Shim | CIR90B-05 | 12、Guide Sleeve | CIR90B-12 | ||
| 6、Rubber ring | CIR90B-06 | 13、Driver Sub | CIR90B-13 | ||
| 7、Valve cap | CIR90B-07 | 14、Outer Sleeve | CIR90B-14 | ||
| CIR-110B | Product data: | ||||
 |
Hammer Length without bit: | 871(mm) | |||
| Top sub thread: | API23/8"REG BOX | ||||
| Outside diameter: | 98(mm) | ||||
| Weight: | 33(KG) | ||||
| Bit diameter: | 110-150(mm) | ||||
| Working Pressure: | 5-10(Bar) | ||||
| Air consumption: | 7-12(M³/min) | ||||
| Bit shank: | CIR110 | ||||
| Item Description |
Part Number |
Item Description |
Part Number |
||
| 1、Top Sub | CIR110B-01 | 8、Valve | CIR110B-08 | ||
| 2、Cap | CIR110B-02 | 9、Air Distributor | CIR110B-09 | ||
| 3、Check Valve | CIR110B-03 | 10、Inner Cylinder | CIR110B-10 | ||
| 4、Spring | CIR110B-04 | 11、Piston | CIR110B-11 | ||
| 5、Shim | CIR110B-05 | 12、Guide Sleeve | CIR110B-12 | ||
| 6、Rubber ring | CIR110B-06 | 13、Driver Sub | CIR110B-13 | ||
| 7、Valve cap | CIR110B-07 | 14、Outer Sleeve | CIR110B-14 | ||
| CIR-130B | Product data: | ||||
 |
Hammer Length without bit: | 890(mm) | |||
| Top sub thread: | API23/8"REG BOX | ||||
| Outside diameter: | 112(mm) | ||||
| Weight: | 48.5(KG) | ||||
| Bit diameter: | 130-175(mm) | ||||
| Working Pressure: | 5-10(Bar) | ||||
| Air consumption: | 7-12(M³/min) | ||||
| Bit shank: | CIR110/CIR130 | ||||
| Item Description | Part Number | Item Description | Part Number | ||
| 1、Top Sub | CIR130B-01 | 8、Valve | CIR130B-08 | ||
| 2、Cap | CIR130B-02 | 9、Air Distributor | CIR130B-09 | ||
| 3、Check Valve | CIR130B-03 | 10、Inner Cylinder | CIR130B-10 | ||
| 4、Spring | CIR130B-04 | 11、Piston | CIR130B-11 | ||
| 5、Shim | CIR130B-05 | 12、Guide Sleeve | CIR130B-12 | ||
| 6、Rubber ring | CIR130B-06 | 13、Driver Sub | CIR130B-13 | ||
| 7、Valve cap | CIR130B-07 | 14、Outer Sleeve | CIR130B-14 | ||
| CIR-150A | Product data: | ||||
 |
Hammer Length without bit: | 904(mm) | |||
| Top sub thread: | F70x10 BOX | ||||
| Outside diameter: | 136(mm) | ||||
| Weight: | 70(KG) | ||||
| Bit diameter: | 150-200(mm) | ||||
| Working Pressure: | 5-10(Bar) | ||||
| Air consumption: | 10-16(M³/min) | ||||
| Bit shank: | CIR150 | ||||
| item Description |
Part Number |
Item Description |
Part Number |
||
| 1、Top Sub | CIR150A-01 | 8、Valve | CIR150A-08 | ||
| 2、Cap | CIR150A-02 | 9、Air Distributor | CIR150A-09 | ||
| 3、Check Valve | CIR150A-03 | 10、Inner Cylinder | CIR150A-10 | ||
| 4、Spring | CIR150A-04 | 11、Piston | CIR150A-11 | ||
| 5、Pressure lining | CIR150A-05 | 12、Guide Sleeve | CIR150A-12 | ||
| 6、Rubber ring | CIR150A-06 | 13、Driver Sub | CIR150A-13 | ||
| 7、Valve cap | CIR150A-07 | 14、Outer Sleeve | CIR150A-14 | ||
| CIR-170A | Product data: | ||||
 |
Hammer Length without bit: | 1030(mm) | |||
| Top sub thread: | F100x28PIN | ||||
| Outside diameter: | 156(mm) | ||||
| Weight: | 96(KG) | ||||
| Bit diameter: | 170-250(mm) | ||||
| Working Pressure: | 5-10(Bar) | ||||
| Air consumption: | 12-18(M³/min) | ||||
| Bit shank: | CIR170 | ||||
| Item Description |
Part Number |
Item Description |
Part Number |
||
| 1、Top Sub | CIR170A-01 | 8、Valve | CIR170A-08 | ||
| 2、Cap | CIR170A-02 | 9、Air Distributor | CIR170A-09 | ||
| 3、Check Valve | CIR170A-03 | 10、Inner Cylinder | CIR170A-10 | ||
| 4、Spring | CIR170A-04 | 11、Piston | CIR170A-11 | ||
| 5、Pressure lining | CIR170A-05 | 12、Guide Sleeve | CIR170A-12 | ||
| 6、Rubber ring | CIR170A-06 | 13、Driver Sub | CIR170A-13 | ||
| 7、Valve cap | CIR170A-07 | 14、Outer Sleeve | CIR170A-14 | ||
| CIR-200A | Product data: | ||||
 |
Hammer Length without bit: | 1058(mm) | |||
| Top sub thread: | F100x28 PIN | ||||
| Outside diameter: | 182(mm) | ||||
| Weight: | 130(KG) | ||||
| Bit diameter: | 200-250(mm) | ||||
| Working Pressure: | 5-10(Bar) | ||||
| Air consumption: | 16-20(M³/min) | ||||
| Bit shank: | CIR200 | ||||
| Item Description |
Part Number |
Item Description |
Part Number |
||
| 1、Top Sub | CIR200A-01 | 8、Valve | CIR200A-08 | ||
| 2、Cap | CIR200A-02 | 9、Air Distributor | CIR200A-09 | ||
| 3、Check Valve | CIR200A-03 | 10、Inner Cylinder | CIR200A-10 | ||
| 4、Spring | CIR200A-04 | 11、Piston | CIR200A-11 | ||
| 5、Pressure lining | CIR200A-05 | 12、Guide Sleeve | CIR200A-12 | ||
| 6、Rubber ring | CIR200A-06 | 13、Driver Sub | CIR200A-13 | ||
| 7、Valve cap | CIR200A-07 | 14、Outer Sleeve | CIR200A-14 | ||
Contact
China office:
WhatsApp:+8613863587857
Tel:+86-635-8278268
Fax:+86-635-6858268
Email:info@hlrocktools.com
Add:Sipeng Street,Shouzhang Town,
Yanggu County,Shandong Province,China
www.hlrocktools.com
Pakistan Office:
CONTACT:Muhammad Haider
WhatsApp:+923246464600
Email:info@hlrocktools.com
Add:PopCorn Studio Gulberg,Block K Gulberg 2,
Lahore,Pakistan
www.hlrocktools.com
©2023 Yanggu Henglong Construction Machinery Co., Ltd .SEO
